2025年4月4日    19:19    星期五
首页 > 过刊浏览>2024年第40卷第2期 >17-27. DOI:10.16544/j.cnki.cn43-1494/u.2023031524041983
PDF HTML阅读 XML下载 导出引用 引用提醒
增强型硫磺胶结料机理及混合料结构力学分析
CSTR:
[cstr]
作者:
作者单位:

(武汉工程大学 土木工程与建筑学院，湖北 武汉 430000)

通讯作者:

周小龙(1983—)，男，副教授，主要从事建筑结构方面的研究工作。E-mail：zhouxiaolong@cqu.edu.cn

中图分类号:

U416.217

基金项目:

国家自然科学基金青年基金项目（52108415）；湖北省自然科学基金青年项目（2020CFB567）；交通运输部重点研发项目（2020-MSI-061）


Mechanism of enhanced sulfur binder and structural mechanical analysis of its mixture
Author:
Affiliation:

(School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430000, China)

  • 摘要
    • | |
  • 访问统计
    • |
  • 参考文献 [18]
    • |
  • 相似文献
    • |
  • 引证文献
    • | |
  • 文章评论
    摘要:

    为了提升Thiopave改性沥青混合料的水稳定性和低温性能，先加入双戊烯（dipentene，DIP）和硫磺，在高温条件下搅拌均匀。再加入丙烯酸异辛酯（ethylhexyl acrylate，EHA），继续高温搅拌。加热温度控制在140 ℃左右，将高速剪切搅拌机的转速缓慢提升至1 500 r/min，持续反应4 h之后，冷却至室温，对Thiopave进行预处理，并对其改性机理、混合料路用性能和力学性能进行全面分析。研究结果表明：添加DIP和EHA后，硫磺分子链变长，硫磺胶结料的表面能和极性分量增加；与Thiopave改性沥青混合料相比，增强型硫磺改性沥青混合料的高温性能略有降低，而水稳定性和低温性能显著提高；与未改性沥青混合料路面相比，增强型硫磺改性沥青混合料路面的面层竖向总变形和变形贡献率均大幅下降。掺入1.0%DIP和0.5%EHA为最佳组合，能够明显改善增强型硫磺改性沥青混合料的路用性能和力学性能。

    Abstract:

    In order to improve the moisture resistance and low temperature performance of Thiopave modified asphalt mixture, dipentene (DIP) and sulfur were added and stirred evenly at high temperature, followed by adding ethylhexyl acrylate (EHA) and stirred well at high temperature around 140 ℃. The speed of mixer was slowly increased to 1 500 r/min, and after reacting for 4 h, the Thiopave particles were cooled to room temperature for pretreatment. In the meantime, the modification mechanism and mixture road performance with its mechanical properties were investigated comprehensively. The results showed that the sulfur molecular chain became longer after the addition of DIP and EHA, the surface energy and polar fraction of the binder were increased. Compared with the Thiopave modified asphalt mixture, the high temperature performance of enhanced sulfur modified asphalt mixture was slightly reduced, while the moisture resistance and low temperature crack resistance were significantly improved. As compared to the unmodified asphalt mixture pavement, the total vertical deformation and deformation contribution rate caused by the surface course of the reinforced sulfur modified asphalt mixture pavement decreased significantly. It was revealed that 1% DIP and 0.5% EHA are recommended as the optimum dosage to apparently improve the road performance and mechanical properties of the enhanced sulfur modified asphalt mixture.

    参考文献
    [1] 杨锡武. SEAM沥青混合料性能及其改性机理研究[J]. 重庆交通大学学报(自然科学版), 2010, 29(2): 194-198.YANG Xiwu. Study on the properties of sulphur extended asphalt mixture and the mechanism of modifying[J]. Journal of Chongqing Jiaotong University (Natural Science), 2010, 29(2): 194-198.
    [2] 张晓靖, 邱延峻, 张晓华, 等. Thiopave改性沥青混凝土综合试验研究[J]. 建筑材料学报, 2018, 21(1): 91-97. DOI: 10.3969/j.issn.1007-9629.2018.01.015.ZHANG Xiaojing, QIU Yanjun, ZHANG Xiaohua, et al. Research on experimental test of Thiopave modified asphalt concrete[J]. Journal of Building Materials, 2018, 21(1): 91-97. DOI: 10.3969/j.issn.1007-9629.2018.01.015.
    [3] KAVUSSI A, AZARNIA M, AYAR P, et al. The fatigue behavior of polymeric sulfur-modified asphalt mixtures subjected to freeze-thaw conditioning[J]. Journal of Thermoplastic Composite Materials, 2022, 35(4): 467-486. DOI: 10.1177/0892705719889985.
    [4] 王修山, 邱洋杰, 朱燮瀚, 等. Thiopave改性沥青混合料路用性能评价[J]. 公路, 2018, 63(4): 209-211.WANG Xiushan, QIU Yangjie, ZHU Xiehan, et al. Evaluation of road performance of Thiopave modified asphalt mixture[J]. Highway, 2018, 63(4): 209-211.
    [5] 张怀志, 王迪, 杨彦海. 沥青混合料高温性能评价指标区分度研究[J]. 建筑材料学报, 2021, 24(6): 1248-1254. DOI: 10.3969/j.issn.1007-9629.2021.06.017.ZHANG Huaizhi, WANG Di, YANG Yanhai. High temperature performance evaluation indices of asphalt mixtures[J]. Journal of Building Materials,2021,24(6):1248-1254. DOI:10.3969/j.issn.1007-9629.2021. 06.017.
    [6] HU X D, ZHANG H W, BAI T, et al. Effects of using brake pad waste powder as a filler material on the rheological and mechanical properties of a sulfur modified asphalt mixture[J]. Construction and Building Materials, 2019, 198: 742-750. DOI: 10.1016/j.conbuildmat.2018.12.007.
    [7] 张玥珺, 徐敏, 赵西坡, 等. 含硫硅烷偶联剂对增强填料的改性及其在橡胶中的应用研究进展[J]. 合成橡胶工业, 2017, 40(4): 327-331.ZHANG Yuejun, XU Min, ZHAO Xipo, et al. Modification of reinforcing filler with sulfur-containing silane coupling agent and its application in rubber[J]. China Synthetic Rubber Industry, 2017, 40(4): 327-331.
    [8] BAI T, WU F, ZHANG Y F, et al. Sulfur modification with dipentene and ethylhexyl acrylate to enhance asphalt mixture performance[J]. Construction and Building Materials, 2022, 343: 128086. DOI: 10.1016/j.conbuildmat.2022.128086.
    [9] 季节, 谢永清, 贾璐. 赛欧铺沥青混合料抗车辙性能及经济性分析[J]. 公路, 2014, 59(12): 191-195.JI Jie, XIE Yongqing, JIA Lu. Anti-rutting performance and economic analysis of Sailupu asphalt mixture[J]. Highway, 2014, 59(12): 191-195.
    [10] DE F P, GIAVARINI C, SANTARELLI M L. Sulphur-extended asphalt: reaction kinetics of H2S evolution[J]. Fuel, 1998, 77(5): 459-463. DOI: 10.1016/s0016-2361(98)80037-9.
    [11] 侯睿, 郭忠印. 硫磺改性沥青混合料的动态模量试验分析[J]. 建筑材料学报, 2013, 16(3): 525-528, 538. DOI: 10.3969/j.issn.1007-9629.2013.03.027.HOU Rui, GUO Zhongyin. Dynamic modulus test analysis of sulfur modified asphalt mixture[J]. Journal of Building Materials, 2013, 16(3): 525-528, 538. DOI: 10.3969/j.issn.1007-9629.2013.03.027.
    [12] 毛博温, 白桃, 张守城, 等. 考虑实测轮载和层间黏结状况的沥青路面黏弹性分析[J]. 公路交通科技, 2022, 39(4):1-10. DOI:10.3969/j.issn.1002-0268.2022.04.001.MAO Bowen, BAI Tao, ZHANG Shoucheng, et al. Analysis on viscoelasticity of asphalt pavement considering actual tire-pavement contact pressure and interlayer bonding conditions[J]. Journal of Highway and Transportation Research and Development, 2022, 39(4): 1-10. DOI: 10.3969/j.issn.1002-0268.2022.04.001.
    [13] 王志臣, 郭乃胜, 赵颖华, 等. 沥青混合料黏弹性主曲线模拟及换算[J]. 工程力学, 2017, 34(2): 242-248. DOI: 10.6052/j.issn.1000-4750.2015.08.0647.WANG Zhichen, GUO Naisheng, ZHAO Yinghua, et al. Viscoelastic master curve simulation and conversion of asphalt mixtures[J]. Engineering Mechanics,2017,34(2):242-248. DOI:10.6052/j.issn.1000-4750. 2015.08.0647.
    [14] 罗文波, 梁晟, 张永军. 沥青混合料动态黏弹性的分数阶微分本构模型[J]. 中国公路学报, 2020, 33(2): 34-43. DOI: 10.19721/j.cnki.1001-7372.2020.02.003.LUO Wenbo, LIANG Sheng, ZHANG Yongjun. Fractional differential constitutive model for dynamic viscoelasticity of asphalt mixture[J]. China Journal of Highway and Transport, 2020, 33(2): 34-43. DOI: 10.19721/j.cnki.1001-7372.2020.02.003.
    [15] 索智, 谭祎天, 张亚, 等. 骨架密实型沥青稳定碎石混合料动态模量研究[J]. 建筑材料学报, 2022, 25(2): 206-213. DOI: 10.3969/j.issn.1007-9629.2022.02.014.SUO Zhi, TAN Yitian, ZHANG Ya, et al. Dynamic modulus of skeleton dense asphalt treated base mixture[J]. Journal of Building Materials, 2022, 25(2): 206-213. DOI: 10.3969/j.issn.1007-9629.2022.02.014.
    [16] 程怀磊, 李斌, 刘黎萍, 等. 移动轴载作用下路面沥青层动态响应模量主曲线研究[J]. 中国公路学报, 2020, 33(10): 125-134. DOI: 10.19721/j.cnki.1001-7372.2020.10.007.CHENG Huailei, LI Bin, LIU Liping, et al. Evaluation of master curve of response-based modulus for asphalt pavement layer under vehicular loading[J]. China Journal of Highway and Transport, 2020, 33(10): 125-134. DOI: 10.19721/j.cnki.1001-7372.2020.10.007.
    [17] VESTENA P M, SCHUSTER S L, DE ALMEIDA P O B J, et al. Dynamic modulus master curve construction of asphalt mixtures: error analysis in different models and field scenarios[J]. Construction and Building Materials,2021,301:124343.DOI:10.1016/j.conbuildmat. 2021.124343.
    [18] 赵延庆, 唐积民, 白龙. 利用沥青混合料复数模量确定松弛模量研究[J]. 建筑材料学报, 2012, 15(4): 498-502. DOI: 10.3969/j.issn.1007-9629.2012.04.012.ZHAO Yanqing, TANG Jimin, BAI Long. Determination of relaxation modulus using complex modulus of asphalt mixture[J]. Journal of Building Materials, 2012, 15(4): 498-502. DOI: 10.3969/j.issn.1007-9629.2012.04.012.
    相似文献
    引证文献
引用本文

陈彦雯,白桃,黄宣,等.增强型硫磺胶结料机理及混合料结构力学分析[J].交通科学与工程,2024,40(2):17-27.
CHEN Yanwen, BAI Tao, HUANG Xuan, et al. Mechanism of enhanced sulfur binder and structural mechanical analysis of its mixture[J]. Journal of Transport Science and Engineering,2024,40(2):17-27.

复制
分享
文章指标
  • 点击次数:55
  • 下载次数: 267
  • HTML阅读次数: 0
  • 引用次数: 0
历史
  • 收稿日期:2023-03-15
  • 在线发布日期: 2024-04-29
文章二维码
通讯地址：湖南省长沙市万家丽南路二段960号长沙理工大学邮政编码：电话：0731-85258183
网址：http://jtkxygc.csust.edu.cn/jtkxygc/home E-mail：csjyxb@163.com
交通科学与工程 ® 2025 版权所有